How to cook minced beef (2024)

Minced beef forms the backbone of countless dishes across various cuisines. From classic British cottage pie to Italian bolognese and American sloppy joes, minced beef is a core ingredient. Most mince is ground to give an even texture and is sold in this form, but it can also be finely chopped to give slightly more texture. Fat ratios vary in minced beef, most packs are labelled with the fat content which is regulated by law. ‘Lean’ mince must have a fat content of 7% or less, pure minced beef must have a fat content of 20% or less. Choose a percentage that suits what you are cooking, lower fat contents tend to give the mince a pastier, drier texture while higher fat contents will give off more fat while cooked. Some mince may also be more coarsely ground, this will give a coarser texture when cooked, which you may want for your recipe.

Advertisem*nt

Basic recipe for frying mince

Ingredients

  • 500g minced beef
  • 1 tbsp oil, optional

1. Frying: Place a large frying pan on the hob, add the oil and turn on the heat to medium. (If you aren't using oil, tip in the minced beef right away.) Once the oil is hot tip in the minced beef, breaking it apart with a spatula, wooden spoon or back of a fork. You want to break it up as much as possible or you will end up with lumps of meat that have fused together as they cook.

2. Season: Sprinkle with a good pinch of salt and pepper. You can also add other seasonings depending on your recipe needs, such as garlic powder, onion powder, or a blend of herbs.

3. Brown the mince: Cook the mince, stirring and breaking up any large chunks for about 6-8 minutes, or until it is fully browned.

4. Drain (optional): If there's a lot of fat rendered out, you might want to drain if off the mince before using it in your recipe. If you are adding onion, garlic or other vegetables you may want to use this fat rather than adding more oil for cooking.

More like this

5. Use or store: Use the cooked mince immediately in your dish or allow it to cool and store it in the fridge for up to 3 days or freeze it for up to 3 months.

Frequently asked questions

How should minced beef be cooked before it is eaten?

Minced beef should be cooked until it is no longer pink before eating. Cooking times may vary depending on the quantity and the heat source, but generally, mince will be thoroughly cooked after browning for 6-8 minutes. If you intend to cook it further in a recipe then you can fry it more quickly or add it to a recipe without browning it first.

Do you cook mince in a saucepan or frying pan?

How to cook minced beef (2)

It’s quicker to cook mince in a frying pan because the wider base allows the mince to cook evenly and it’s easier to break up any lumps. A large saucepan can be used, but it might take a little longer.

Do you have to boil mince before frying?

No, you do not need to boil mince before frying. Frying gives a good texture and flavour, as it allows the meat juices to concentrate, and provided you scrape up all the browned bits to enhance its taste.

How do you cook mince so it's tender?

To cook tender minced beef make sure it has enough fat content to stop it drying out, and then use it in dishes that allow it to cook for long enough to become tender. Even in very simple dishes like this classic mince and tatties the meat is cooked for long enough to tenderise it.

Discover ways to cook with minced beef

Chilli con carne

If you're looking for an easy meal that's a great crowd-pleaser for a casual get-together, look no further than our chilli con carne recipe.

Next level spaghetti bolognese

Elevate your traditional spaghetti bolognese with this innovative recipe, incorporating unconventional techniques and ingredients to create the ultimate pasta dish.

Lasagne

Little is more satisfying than cooking a classic to perfection—Sarah Cook gives us a lesson in how to make lasagne. Plus, we have our helpful video on how to layer lasagne so that you get the perfect ratios of base, pasta, and béchamel.

Advertisem*nt

Discover more helpful tips and tricks...

How to cook mushrooms
How to light a BBQ
How to cook with gooseberries
How to waste less bread
How to make the perfect sandwich

How to cook minced beef (2024)

FAQs

What is the best way to cook mince? ›

Basic recipe for frying mince
  1. Frying: Place a large frying pan on the hob, add the oil and turn on the heat to medium. ...
  2. Season: Sprinkle with a good pinch of salt and pepper. ...
  3. Brown the mince: Cook the mince, stirring and breaking up any large chunks for about 6-8 minutes, or until it is fully browned.

Do you cook mince in a saucepan or frying pan? ›

The best way to cook beef mince

Add a dash of oil to a hot frying pan. Remove the beef mince from the packaging and distribute it evenly into the pan. Stir it over the high heat for around 6-8 minutes, so it doesn't stick to the pan and browns evenly. Season early on with sea salt and freshly ground black pepper.

How long should beef mince be cooked? ›

Mince is cooked when the temperature has reached 75°C. If you don't have a thermometer, ensure it's been simmering on the heat (it should be bubbling gently) for at least 15 minutes. If you're cooking meatballs or meatloaf, use a thermometer to check the temperature or cut open to check it is cooked through.

What makes mince taste better? ›

Add a little more oil if your mince is less than 75% lean. Fat = flavor and many seasonings are fat-soluble. Bloom / soften / sautee some aromatics in said oil before adding your mince. Onions , garlic, green onions, leeks, shallots, celery or celery seed are the usual suspects.

Is it better to cook ground beef with butter or oil? ›

The trick to cooking ground beef well is to not move it around a lot until it's finished cooking and nicely browned. This helps create a crust on the meat which is delicious. I sauté it in cooking oil. I usually use olive oil because that's my go-to, but your favorite cooking oil will work too.

Is it better to boil or fry ground beef? ›

Boiling ground beef is the best way to cook it so that it comes out in small, fine crumbles. Trust me, this is the secret to all those amazing tacos and pasta sauces at your favorite restaurant! It's also a healthier option, because the boiling process helps separate the fat from the meat, and it comes out quite lean.

Do you add water when cooking mince? ›

Simmer for 20 minutes.

Stir the contents of the skillet every 5 minutes or so. If the liquid evaporates before the mince finishes, add more water. Pour additional water into the skillet 1/4 cup (60 ml) at a time.

What is mince in cooking method? ›

Mincing is a food preparation technique in which food ingredients are finely divided into uniform pieces. Minced food is in smaller pieces than diced or chopped foods, and is often prepared with a chef's knife or food processor, or in the case of meat by a specialised meat grinder.

Is minced beef healthy? ›

With mince, you don't need to eat a lot of it to get the nutritional goodness. In fact, a 100g portion of lean, stewed, beef mince contains a good source* of protein, zinc, vitamins B3 and B12. It also contains a source** of iron, potassium, phosphorus, vitamins B1, B2, and B6.

How do you know when mince is cooked? ›

Cook ground beef to an internal temperature of 160 degrees F as measured with a food thermometer. The color of cooked ground beef can be quite variable. At 160 degrees F, a safely cooked patty may look brown, pink or some variation of brown or pink.

How do you cook mince without it being chewy? ›

How to cook mince meat properly:
  1. Put the mince in first without any oil.
  2. Make sure your pan is hot and that the mince sizzles when it hits the pan.
  3. Don't stir the mince from the start. ...
  4. It will smell like roast beef if you are doing it right.
  5. A plastic whisk should be used to break down the lumps.
Oct 27, 2022

How do you cook mince so it's tender? ›

Place the minced meat in a bowl then add some milk and use your hands to combine together well. As you mix, you will feel the meat becoming softer and any lumps just melt away. To cook, just melt a little butter in a frying pan and add the meat and milk mixture.

What is the best way to mince? ›

Mincing is taking something that is roughly chopped and then chopping it finely. Put one hand flat on top of the knife while moving the knife over the chopped pile. Occasionally, use the heel of the knife to gather the pile back together. This will work for a recipe that calls for finely chopped or minced ingredients.

Is mince better boiled or fried? ›

Boiling ground beef is the best way to cook it so that it comes out in small, fine crumbles. Trust me, this is the secret to all those amazing tacos and pasta sauces at your favorite restaurant! It's also a healthier option, because the boiling process helps separate the fat from the meat, and it comes out quite lean.

Top Articles
Latest Posts
Article information

Author: Prof. Nancy Dach

Last Updated:

Views: 6554

Rating: 4.7 / 5 (77 voted)

Reviews: 92% of readers found this page helpful

Author information

Name: Prof. Nancy Dach

Birthday: 1993-08-23

Address: 569 Waelchi Ports, South Blainebury, LA 11589

Phone: +9958996486049

Job: Sales Manager

Hobby: Web surfing, Scuba diving, Mountaineering, Writing, Sailing, Dance, Blacksmithing

Introduction: My name is Prof. Nancy Dach, I am a lively, joyous, courageous, lovely, tender, charming, open person who loves writing and wants to share my knowledge and understanding with you.